Sensor:
Button Array

This sensor is a handy array of 4 buttons that can be used for building custom controller consoles. The Button Array connects using a standard, 6-conductor RJ11 (telephone) cable to a sensor interface such as the Teabox.

The Button Array is also contains several mounting holes to allow it to be affixed to a base.

View the Technical Specifications in a separate window.

Order Sensors

T301A
4 Button, Button Array
[$39]

Review Your Shopping Cart

To change quantities or review your order, please click the "Check Out" button below.

Technicnal Specifications for Electrotap T301A Button Array

Technical Specifications for Electrotap T301A Button Array

Physical Attributes

Dimensions: 6 3/8in (161mm) x 3/4in (20mm) x 3/8" (10mm)
Solder Mask Color: Blue
4 Buttons with Black caps.
Temperature Range: -30C to 75C (-21F to 160F)

Ordering Information

Full Version (with cable) - T301A

Sensing Specifications

SPST Button manufactured by ITT Industries.

Electrical Specifications

Voltage Source: 0-5 Volts
Minimum Current Source: 5mA
Voltage Returned by Sensor:
- Button Pressed, 5 Volts
- Button Not Pressed, Open Circuit (not connected)

Cable Specifications

Electrotap P/N: CAB-RJ11-6
Standard 6 foot (approximately 2 meter), 6 conductor RJ11/Telephone cable.
Color: White
RJ11 connector layout (teabox end):
- Pin 1: 5 Volts
- Pin 2: Sensor 1
- Pin 3: Sensor 2
- Pin 4: Sensor 3
- Pin 5: Sensor 4
- Pin 6: Ground
RJ11 connector layout (sensor end):
- Pin 1: Ground
- Pin 2: Button S1
- Pin 3: Button S2
- Pin 4: Button S3
- Pin 5: Button S4
- Pin 6: 5 Volts

Application Examples

Triggering events
Recalling presets
Changing the state of parameters for effects units, synthesizers, etc.
Any application where buttons are a useful interface paradigm.

Sensor: Button Array