Sensor:
Toggle Array

This sensor is a handy array of 4 toggle switches that can be used for building custom controller consoles. The Toggle Array connects using a standard, 6-conductor RJ11 (telphone) cable to a sensor interface such as the Teabox.

The Toggle Array connects to one of the analog or digital toggle inputs on the back of the Teabox.

View the Technical Specifications in a separate window.

Order Sensors

T301B
4 Switch, Toggle Array
[$55]

Review Your Shopping Cart

To change quantities or review your order, please click the "Check Out" button below.

Technicnal Specifications for Electrotap T301B Toggle Array

Technical Specifications for Electrotap T301B Toggle Array

Physical Attributes

Dimensions: 6 3/8in (161mm) x 3/4in (20mm) x 3/8" (10mm)
Solder Mask Color: Blue
4 Industrial-Grade Toggle Switches. Rated for greater than 50,000 switching cycles.
Temperature Range: -30C to 75C (-21F to 160F)

Ordering Information

Full Version (with cable) - T301B

Sensing Specifications

SPDT miniature toggle switches manufactured by E-Switch.

Electrical Specifications

Voltage Source: 0-5 Volts
Minimum Current Source: 5mA
Voltage Returned by Sensor:
0 Volts or 5 Volts

Cable Specifications

Electrotap P/N: CAB-RJ11-6
Standard 6 foot (approximately 2 meter), 6 conductor RJ11/Telephone cable.
Color: White
RJ11 connector layout (teabox end):
- Pin 1: 5 Volts
- Pin 2: Sensor 1
- Pin 3: Sensor 2
- Pin 4: Sensor 3
- Pin 5: Sensor 4
- Pin 6: Ground
RJ11 connector layout (sensor end):
- Pin 1: Ground
- Pin 2: Button S1
- Pin 3: Button S2
- Pin 4: Button S3
- Pin 5: Button S4
- Pin 6: 5 Volts

Application Examples

Triggering events
Recalling presets
Changing the state of parameters for effects units, synthesizers, etc.
Any application where switches are a useful interface paradigm.

Sensor: Toggle Array