Sensor:
Slider / Fader

This sensor is a 100mm slider useful for a variety of applications. It may be used for building custom controller consoles, or measuring the position of a mechanical device. The Slider connects using our standard locking Molex connector to attach a cable to a sensor interface such as the Teabox.

The Slider easily connects to one of the analog inputs on the front of the Teabox. With an adapter it may be used with many other sensor interfaces.

View the Technical Specifications in a separate window.

Order Sensors

T301C
100mm Slider
[$49]

Review Your Shopping Cart

To change quantities or review your order, please click the "Check Out" button below.

Technicnal Specifications for Electrotap T301C Slider

Technical Specifications for Electrotap T301C Slider/Potentiometer

Physical Attributes

Dimensions: 6 3/8in (161mm) x 3/4in (20mm) x 3/8" (10mm)
Solder Mask Color: Blue
100mm Slider-Potentiometer.
Ends encased in protective heatshrink (black).
Temperature Range: -30C to 75C (-21F to 160F)

Ordering Information

Full Version (with cable) - T301C
Project Version (no cable, no output connector, heatshrink provided separately) - T301CP

Sensing Specifications

Slide Potentiometer manufactured by Panasonic.

Electrical Specifications

Voltage Source: 0-5 Volts
Minimum Current Source: 1.5mA
Voltage Returned by Sensor: Industry Standard 0.25 Volts to 4.75 Volts, fully conditioned and buffered.
Connector Layout (Pin 1 is indicated by an arrow on the top of the connector)
- Pin 1: Ground (from interface )
- Pin 2: Sensor Output
- Pin 3: 5 Volts (from interface)

Cable Specifications

Electrotap P/N: CAB-MX2LF3-3
Standard 3 foot (approximately 1 meter) premium quality Canare L-4E5C star-quad cable with braided shielding.
Sensor-end connector is our standard, female locking Molex connector. Interface-end connector is top-of-the-line Neutrik XLR connector.
Molex connector layout:
- Pin 1: Ground
- Pin 2: Sensor Output
- Pin 3: 5 Volts
XLR connector layout:
- Pin 1: Ground
- Pin 2: 5 Volts
- Pin 3: Sensor Output

Application Examples

Controling Parameters
Any application where sliders or faders are a useful interface paradigm.

Sensor: Slider / Fader